|
 |
FEP Teflon® Extended Properties
| General |
|
ASTM Test Method |
Units |
|
|
| Water Absorption |
24 hr. |
ASTM D570 |
% |
0.004 |
| Weather and Chemical Resistance |
|
- |
- |
Outstanding |
| Limiting Oxygen Index |
|
ASTM D2863 |
% |
93 |
| |
|
|
|
|
| Mechanical |
|
ASTM Test Method |
Units |
|
|
| Tensile Strength |
23°C (73°F) |
ASTM D2116 |
MPa(psi) |
23(3,400) |
| Specific Gravity |
|
ASTM D792 |
- |
2.13-2.17 |
| Ultimate Elongation |
23°C (73°F) |
ASTM D2116 |
% |
300 |
| Flexural Modulus |
23°C (73°F) |
ASTM D790 |
MPa(psi) |
586(90,000) |
| Impact Strength |
23°C (73°F) |
ASTM D256 |
J/m(ft-lb/in) |
586(90,000) |
| Hardness Durometer |
|
ASTM D2240 |
Shore D |
56 |
| Comprehenssive Strength |
|
ASTM D695 |
MPa(psi) |
21(3,100) |
| Linear Coefficient of Expansion |
0-100°C
32-212°F |
-
- |
mm/mm/°C
in/in/°F |
13.5 x 10-5
7.5 x 10-5 |
| |
|
|
|
|
| Thermal |
|
ASTM Test Method |
Units |
|
|
| Nominal Melting Point |
|
DTA-E168 |
°C (°F) |
255-265(491-510) |
| Flow Rate |
|
ASTM D2116 |
g/10 min |
7 |
| Upper Service Temperature |
|
UL746 |
°C (°F) |
204(400) |
| |
|
|
|
|
| Electrical |
|
ASTM Test Method |
Units |
|
|
| Dielectric Strength |
0.25 mm (0.010 in) |
ASTM D149 |
kV/mm (V/mil) |
80(2,000) |
| Dielectric Constant |
1 MHz, 23°C(73°F) |
ASTM D1531 |
- |
2.02 |
| Dissipation Factor |
1 MHz, 23°C(73°F) |
ASTM D1531 |
- |
0.0007 |
| Volume Resistivity |
|
ASTM D257 |
Tohm-m (ohm-cm) |
>103 (1017) |
| Arc Resistance |
|
ASTM D495 |
seconds |
No Track |
Copyright © IDEX Corporation 2010.
IDEX Health & Science is a Unit of IDEX® Corporation. | Privacy Policy
|
|
