|
 |
|||||||||||||||||||
|
 |
Static Mixing Tees • PEEK™ body with Fingertight Fittings • Ideal for flow rates 0.5 and 3 ml/min and a maximum pressure of 6,000 psi (414 bar) • Available with either an UHMWPE or Stainless Steel Frit The U-466 static mixing tees are ideal for microbore or analytical gradient HPLC. With a 2.2µl swept volume (including frit volume), these tees create a highly turbulent, but low dead-volume mixing chamber. The back pressure caused by these tees is only 10 to 20 psi (.7 to 1.4 bar). The center port has a 10µm UHMWPE or stainless steel filter that aids in mixing. Our experience is that well-mixed solvents often increase outgassing. To maintain a bubble-free fluid pathway, we recommend solvent degassing when using this product. NOTE: The frit inside these mixing tees is not replaceable. Once your frit needs to be changed, the whole unit must be replaced. For microflow applications, consider our NanoMixer™ and Micro Static Mixing Tee. Copyright © IDEX Corporation 2010. IDEX Health & Science is a Unit of IDEX® Corporation. | Privacy Policy |